TY  - CONF
TI  - Application of Virtual and Augmented Reality Techniques During Design and Construction Process of Building Projects
C1  - Dublin, Ireland
C3  - Proc. 27th Annual Conference of the International Group for Lean Construction (IGLC)
SP  - 1105
EP  - 1116
PY  - 2019
DO  - 10.24928/2019/0220
AU  - Orihuela, Pablo
AU  - Noel, María
AU  - Pacheco, Santiago
AU  - Orihuela, Jorge
AU  - Yaya5, Carlos
AU  - Aguilar, Rafael
AD  - General Manager Motiva S.A, Perú. Full Professor, Department of Engineering, Civil Engineering Section, Pontificia Universidad Católica del Perú PUCP, porihuela@motiva.com.pe
AD  - Lecturer, Department of Engineering, Civil Engineering Section, Pontificia Universidad Católica del Perú PUCP, mariaf.noel@pucp.pe
AD  - Civil Engineer, Motiva S.A., Perú, spacheco@motiva.com.pe
AD  - Architect, Motiva S.A., jorihuela@motiva.com.pe
AD  - Research Assistant, VReal Research Laboratory, Civil Engineering Section, Pontificia Universidad Católica del Perú PUCP, c.yaya@pucp.pe
AD  - Full Professor, Department of Engineering, Civil Engineering Section, Pontificia Universidad Católica del Perú PUCP, raguilar@pucp.pe
AB  - Research regarding Virtual Reality and Augmented Reality (VR/AR) as support tools of visual managment of design and construction for building projects has increased notably in recent years. However, most of these investigations present applications that improve the management of the project in a single phase or aspect, leaving aside the generation of value throughout the entire project. This article presents a brief review of the current state of VR / AR technologies, proposes the application of the Lean philosophy trough VR / AR applications in the different phases of the life cycle of a building project, and also shows several applications in real cases in which encouraging intial results were obtained. The proposed applications proved to be efficient to improve the communication between the different stakeholders, improving the understanding of the project, giving reliability to the decision making process, foreseeing errors, decreasing negative iterations and avoiding the time delays generated by the lack of an adequate visualization of the project. Finally, some recommendations about the nomenclature and standarization of the development level of the VR/AR applications are provided.
KW  - Virtual reality
KW  - augmented reality
KW  - visual management
KW  - value
KW  - waste
PB  - 
T2  - Proc. 27th Annual Conference of the International Group for Lean Construction (IGLC)
DA  - 2019/07/03
CY  - Dublin, Ireland
L1  - http://iglc.net/Papers/Details/1747/pdf
L2  - http://iglc.net/Papers/Details/1747
N1  - Export Date: 25 April 2024
DB  - IGLC.net
DP  - IGLC
LA  - English
ER  -